Loading... Please wait...

Advanced Search | Search Tips

Our Newsletter

Air Techniques Dental X-ray Film Processor Developer AT 2000 XR

  • 1.Air Techniques Dental X-ray Film Processor Developer AT 2000 XR
75.00 LBS
Calculated at checkout
Bookmark and Share

Product Description

Air Techniques Dental X-ray Film Processor Developer AT 2000 XR



  • Model: AT 2000 XR
  • 120V
  • Fully tested; Works great
  • 2 Mo Warranty
  • *All processors are similar in age and quality*



Part Number
Process Time
Archival, 5 1/2 minutes. "Quick-look" Endo periapical films, 2 1/2minutes
Chemistry Replenishment
At initial Power On, 4 1/4oz. in 90 seconds. Every 12 3/4" linear film, 1 2/3 oz. in 35 seconds
115V, 60Hz, 8A. Use 3 prong grounded outlet. Dedicated 15 amp line recommended
Water Flow
1/2 gallon/minute when processing film. Do not use water softeners
Water Pressure
80 psi max. / 30 psi min. Manual shut-off required near processor
Water Connection
1/2" female NP and 3/4" male garden hose adapters provided. A 6' long water supply hose is provided to connect to the rear of the processor
Water Backflow Prevention
Vacuum breaker not required. Processor has a 1" air gap between water supply inlet and top of highest water level in processor
Water Temperature
Mixing valve not required if water temperature is between 55 degree F (13 degrees C) to 80 degrees F (27 degrees C)
Use 1 1/2" diameter vertical PVC standpipe, open at top, connected to 1 1/2" PVC trap. Top of standpipe must be 6" below bottom of counter top. DO NOT DRAIN INTO COPPER OR BRASS. Ventilation: Room air must not exceed 80 degrees F (27 degrees C) during processing. Processing generates heat. Adequate ventilation of 10 air changes per hour is necessary to maintain darkroom temperature
Dimensions (HxWxD)
18"x15"x25" with leveling base. With Daylight loader, 18"x16.25"x39"; Daylight Loader extends additional 10.25" below counter top
90lbs with water and chemistry, 75lbs empty

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Air Techniques Dental X-ray Film Processor Developer AT 2000 XR to your wish list.

You Recently Viewed...